Network Cabling Irvine, CA | Cat6, Cat6A Structured Cabling
Network cabling in Irvine
Irvine offices grow and shrink fast. A tenant takes a floor on Von Karman, adds twenty seats, splits into two suites, then moves to Spectrum when the lease is up.
Book a free Irvine site survey Call (949) 396-2622 Text usNetwork Cabling done right for Irvine businesses
Each move leaves behind ceiling cable nobody labeled and a rack that looks like spaghetti. When you call us it is usually because a new hire has no working jack, a conference room drops calls, or the landlord wants abandoned cable pulled before you move out.
We run Cat6 and Cat6A structured cabling built to be tested, labeled and handed over with documentation. That means proper pathways, plenum-rated cable where Irvine buildings require it, patch panels that match the floor plan, and a certification report for every drop. We do full build-outs for new suites, additions for growing teams, and cleanup jobs where we trace, tone and remove what is dead. For labs and larger floors we tie the copper back to fiber between telecom rooms so the backbone is not the bottleneck.
We terminate to TIA-568-B, keep bends and bundles within spec, and separate low voltage from power. Plenum cable goes above drop ceilings that carry return air, riser cable between floors. Every run is documented so the next tech — ours or yours — can find it in a minute.
What is included
- Cat6 and Cat6A structured cabling, plenum or riser rated to match your ceiling and code
- Patch panels, racks, cable management and a labeled, documented closet
- Certification testing on every drop with a printed test report
- Voice, data, PoE camera and access-point drops on the same run
- Conduit, J-hooks and pathways that pass inspection
- Moves, adds and changes after the install without a full re-pull
Free site survey in Irvine
We walk the property, count what you need and give you an itemized quote — free, no obligation.
Book itServing all of Irvine
ZIP codes 92602, 92603, 92604, 92606, 92612, 92614, 92617, 92618, 92620, 92697. Nearby: Santa Ana, Newport Beach, Laguna Beach, Anaheim, Huntington Beach, Long Beach.
Network Cabling across Irvine
In the Irvine Business Complex, buildings along Michelson, Main Street and Dupont often share a telecom room per floor, and the ceiling space above the T-bar is a plenum, so cable choice matters. Out at Irvine Spectrum and along Alton and Barranca, the flex and tilt-up buildings have exposed structure and long runs, so we plan IDF locations before pulling anything. University Research Park and the buildings near UC Irvine tend to be lab-heavy, which means more drops per square foot and more coordination. We work in all of them, ZIPs 92612, 92614 and 92618 most of all.
Survey, install, document
Survey
We walk the space, count drops, trace pathways and check the closet, power and ceiling type. Free, and usually the same week.
Install
Cable is pulled in bundles, dressed, terminated to TIA-568 standards and labeled at both ends.
Certify
Every drop is tested with a certifier and you get the report, a drawing and photos of the closet.
Network Cabling in Irvine — questions we get
Should I run Cat6 or Cat6A in an Irvine office?
Cat6A for most new Irvine build-outs. It supports 10 gigabit over full-length runs, handles Wi-Fi 6E and 7 access points, and costs little more than Cat6 on a fresh install. Cat6 still makes sense for small additions to an existing Cat6 plant. We look at your switch gear and growth plans at the free site survey and recommend one, not both.
Can you pull cable after hours in an IBC building?
Yes. Many Irvine landlords require noisy or ceiling work outside business hours, especially in the mid-rises near John Wayne Airport. We schedule evening and weekend pulls, coordinate with building engineering for roof and riser access, and leave the space clean for the next morning. It is a normal part of working in the Irvine Business Complex.
Do you remove old abandoned cable when we move out of an Irvine suite?
Yes. Lease language and the California building code both push tenants to remove abandoned cable from plenums when they vacate. We trace what is live, pull what is dead, and give you a short report the property manager can file. It is a common request from tenants leaving suites on Jamboree and Irvine Center Drive.
How long does a network cabling install take?
A typical office of 20 to 60 drops is one to three days. Larger buildouts are scheduled in phases so your team keeps working. After the free site survey you get a firm schedule with the itemized quote.
Cat6 or Cat6A — which should I choose?
Cat6 handles 1 Gbps at 100 meters and 10 Gbps at short runs, and is the right choice for most offices. Cat6A carries 10 Gbps the full distance and supports higher-power PoE, so we recommend it for new builds, Wi-Fi 6E/7 access points and anything you plan to keep for 15 years.
Do you label and test every cable?
Yes. Every drop is labeled at the jack and the patch panel, certified with a tester, and you receive the test report. Untested cabling is where intermittent network problems come from, so we do not skip it.
Other low voltage services in Irvine
Industries we serve in Irvine
Local guide: Security camera laws, permits and placement for Irvine businesses (2026 guide)
Let's walk your Irvine property — on us
Fill out the form and you will hear from us fast — usually the same day. Or skip the typing:
Call or text (949) 396-2622 — we answer.
Text us · Email tech@itech2.co
Have a question first? Read the FAQ or see who does the work.
Main office line: (866) 904-8787 · Licensed C-7 #1098090 · Since 2010