Single-mode fiber covers several miles, so any two buildings on a Riverside campus, church property or business park are within reach. The real constraints are the path: existing conduit, trenching across a parking lot, or an aerial run between structures. On the free site survey we walk the route and figure out the cheapest path that will pass inspection.

If any drop is more than 100 meters from the network closet, you need fiber for that segment. In a Sycamore Canyon tilt-up that usually means fiber from the office IDF to a remote cabinet near the far dock doors, then copper from there to cameras, scanners and access points. Smaller Hunter Park buildings often get by on Cat6A alone.

Yes. We fusion splice and terminate on site, then test every strand with an OTDR and a light source and power meter. You get a printed report with loss per strand. That documentation matters when a carrier, a general contractor or the City of Riverside wants proof the backbone meets spec before the tenant moves in.

When a run is longer than 100 meters, when it crosses between buildings or floors with separate electrical grounds, or when you need more than 10 Gbps. Camera systems on large lots and campuses usually need fiber to the far poles.

Yes. We locate the break with an OTDR, splice or re-terminate, and re-test. Most single breaks are fixed the same day once we are on site.

Every strand is tested with an optical power meter and, on longer runs, an OTDR. You get the loss report with the invoice.