Low Voltage Contractor for New Builds San Fernando, CA
Low voltage rough-in and installation for San Fernando construction projects
San Fernando's Corridors Specific Plan opened the door to mixed-use and multi-family projects along Maclay Avenue, Truman Street and San Fernando Road, and to workplace-flex buildings near First Street. That means general contractors, developers and property owners in 91340 are doing tenant improvements, ground-up mixed-use, and warehouse rehabs that all need a low-voltage subcontractor who shows up when the framing is open and again when the finishes are done.
Book a free San Fernando site survey Call (442) 222-2775 Text usWhat San Fernando construction & new builds need from a low voltage contractor
We do the rough-in: conduit, boxes, backboards and pull strings for data, cameras, access control, intercom and AV, coordinated with the electrician and your drawings. Then we come back to pull, terminate, test and turn on the system. We are a licensed C-7 contractor, our work passes City of San Fernando inspections, and we document everything so the owner has a labeled as-built. Free site survey or plan review for any project in the city.
We handle both sides of construction: monitored camera towers that stop theft during the build, and the low voltage rough-in and finish work that has to land at the right moment in the schedule. General contractors get one licensed sub for cabling, cameras, access and monitoring.
The problems we get called for
- Copper, tool and equipment theft from open sites
- Sites with no power or internet yet
- Cabling that has to go in before walls close
- Insurance and general-contractor security requirements
What we install
- Solar and battery-powered camera towers with cellular backhaul for open sites
- 24/7 AI monitoring with live voice-down from the first night
- Structured cabling, fiber and low voltage rough-in on the construction schedule
- Access control and cameras commissioned before turnover
- Temporary Wi-Fi for the site office and trailers
Construction & New Builds across San Fernando
Projects on Maclay between First and Fourth are infill on tight lots with retail below and units above, so cable paths and telecom rooms need planning early. Truman Street and San Fernando Road projects near the Metrolink station are often mixed-use with parking gates and lobby access to spec. Rehabs of block buildings on Arroyo Avenue and First Street need conduit and penetrations planned before the slab and walls are closed. We coordinate with the City of San Fernando Community Development Department on Macneil Street and with the inspector on site.
Cameras that stop theft, not just record it
AI Camera Monitoring watches your San Fernando property around the clock, warns intruders off with live audio the moment they step on site, and escalates real threats with video-verified dispatch. It works with cameras we install and, in most cases, with the cameras you already have.
$1 per camera per day on a schedule · $1.50 for 24/7 · first month free
Book your free assessment by September 30 and your first month of monitoring is free.
See how it works
Construction & New Builds in San Fernando — questions we get
When should a GC bring in the low-voltage contractor on a San Fernando project?
Before rough framing inspection. That is when conduit, boxes, backboards and pathways for data, cameras, access control and intercom go in cheaply. Bringing us in after drywall means opening finished walls. Send us the plans and we will scope the rough-in and the finish phase together. Free plan review.
Can you handle the low-voltage permit and inspection with the City of San Fernando?
Yes. We pull the low-voltage permits our scope requires through the City of San Fernando Community Development Department and meet the inspector on site. We have been through the process before, so it does not hold up your schedule.
Do you provide as-built drawings for cabling on San Fernando new builds?
Yes. Every drop, camera, reader and device is labeled and documented, and the owner gets test results and a drawing showing what goes where. That saves the property manager and the next contractor a lot of guessing. Included on every project we finish.
How do you secure a construction site with no power or internet?
With solar and battery-powered camera towers on cellular backhaul, monitored 24/7 by AI with live voice-down. They go up in an afternoon and move with the phases of the job.
When should low voltage rough-in happen on a new build?
Right after framing and electrical rough-in, before insulation and drywall. We coordinate with the GC schedule so pathways, boxes and cable are in place before walls close.
Can you monitor a jobsite for the length of the project?
Yes. Monitoring is month to month from $1 per camera per day, so it can run for the duration of the build and stop at turnover.
Services for San Fernando construction & new builds
Other industries we serve in San Fernando
Local guide: Security camera laws, permits and placement for San Fernando businesses (2026 guide)
Let's walk your San Fernando property — on us
Fill out the form and you will hear from us fast — usually the same day. Or skip the typing:
Call or text (442) 222-2775 — we answer.
Text us · Email tech@itech2.co
Have a question first? Read the FAQ or see who does the work.
Main office line: (866) 904-8787 · Licensed C-7 #1098090 · Since 2010