New Construction Low Voltage Riverside, CA | Rough-In
Low voltage rough-in and installation for Riverside new construction
Riverside is still building. Distribution centers keep going up along Sycamore Canyon Boulevard, Alessandro Boulevard and the 215 corridor.
Book a free Riverside site survey Call (951) 289-3365 Text usWhat Riverside construction & new builds need from a low voltage contractor
Mixed-use and apartment projects are rising Downtown and along University Avenue. Orangecrest, Mission Grove and the Alessandro Heights area keep adding retail pads, medical buildings and schools. General contractors and developers on those jobs need a low-voltage subcontractor who shows up at rough-in, coordinates with the electrician, and does not hold up the certificate of occupancy.
ITECH2 works as the low-voltage contractor on Riverside new builds and tenant improvements: conduit and pathway planning with the design team, rough-in of Cat6, fiber, camera, access control, AV and intercom cabling before drywall, trim-out and device installation after, and testing and as-builts at closeout. We carry the C-7 license and insurance a GC needs on file, we read the plans, and we sequence with your framing, electrical and drywall schedule. Start with a free site survey or a plan review.
We handle both sides of construction: monitored camera towers that stop theft during the build, and the low voltage rough-in and finish work that has to land at the right moment in the schedule. General contractors get one licensed sub for cabling, cameras, access and monitoring.
The problems we get called for
- Copper, tool and equipment theft from open sites
- Sites with no power or internet yet
- Cabling that has to go in before walls close
- Insurance and general-contractor security requirements
What we install
- Solar and battery-powered camera towers with cellular backhaul for open sites
- 24/7 AI monitoring with live voice-down from the first night
- Structured cabling, fiber and low voltage rough-in on the construction schedule
- Access control and cameras commissioned before turnover
- Temporary Wi-Fi for the site office and trailers
Construction & New Builds across Riverside
On a Sycamore Canyon or 215-corridor shell building, the work is conduit stubs and pull strings at rough-in, then a full build-out once the tenant signs. Downtown and University Avenue mixed-use projects need riser pathways, unit intercom and access wiring, and garage camera conduit planned early. Medical and retail pads in Orangecrest and Mission Grove are usually tenant improvements with a tight schedule and inspections through the Building & Safety Division. Riverside heat and dust on active sites mean we protect pulled cable and label everything so trim-out goes fast. We meet GCs at the site trailer, not by email.
Cameras that stop theft, not just record it
AI Camera Monitoring watches your Riverside property around the clock, warns intruders off with live audio the moment they step on site, and escalates real threats with video-verified dispatch. It works with cameras we install and, in most cases, with the cameras you already have.
$1 per camera per day on a schedule · $1.50 for 24/7 · first month free
Book your free assessment by September 30 and your first month of monitoring is free.
See how it works
Construction & New Builds in Riverside — questions we get
When should the low voltage contractor come in on a Riverside new build?
Before framing is closed. The best results on Riverside projects come when we review plans before rough-in, coordinate conduit and box locations with the electrician, and pull cable while walls and ceilings are open. Bringing us in after drywall costs more and leaves exposed raceway. Call during design and we will review the drawings free.
Can you rough in a Riverside warehouse shell for a tenant that has not signed yet?
Yes. For Sycamore Canyon and 215-corridor shells we install conduit stubs, pull strings and pathway from the electrical room to future office areas, dock doors and yard camera locations so any tenant can build out fast. It is a small cost during construction and a big selling point for leasing.
Do you provide as-built drawings and test reports at closeout on Riverside projects?
Yes. Every Riverside project closes with labeled cabling, certified test reports for each copper and fiber run, device location drawings and system documentation for cameras, access control and AV. That package is what the owner's IT team and the general contractor need to close the job and what the Building & Safety Division may ask to see.
How do you secure a construction site with no power or internet?
With solar and battery-powered camera towers on cellular backhaul, monitored 24/7 by AI with live voice-down. They go up in an afternoon and move with the phases of the job.
When should low voltage rough-in happen on a new build?
Right after framing and electrical rough-in, before insulation and drywall. We coordinate with the GC schedule so pathways, boxes and cable are in place before walls close.
Can you monitor a jobsite for the length of the project?
Yes. Monitoring is month to month from $1 per camera per day, so it can run for the duration of the build and stop at turnover.
Services for Riverside construction & new builds
Other industries we serve in Riverside
Local guide: Security camera laws, permits and placement for Riverside businesses (2026 guide)
Let's walk your Riverside property — on us
Fill out the form and you will hear from us fast — usually the same day. Or skip the typing:
Call or text (951) 289-3365 — we answer.
Text us · Email tech@itech2.co
Have a question first? Read the FAQ or see who does the work.
Main office line: (866) 904-8787 · Licensed C-7 #1098090 · Since 2010