If the buildings are more than about 300 feet apart, or on separate electrical services, yes. Copper past that distance fails, and copper between separately grounded buildings can carry damaging surges. Fiber solves both problems. This comes up constantly on packing and farm properties around Oxnard where a cooler, an office and a shop sit on one lot. The free site survey confirms the path and the distance.

Usually. We rod and check the conduit first, because a lot of older conduit around Rice Avenue and Del Norte has collapsed sections, water or old cable in the way. If the path is clear, we pull armored or loose-tube fiber and splice in enclosures at each end. If it is blocked, we tell you before quoting instead of finding out mid-job. That check is part of the free site survey.

Single-mode for anything between buildings or over a few hundred feet, and it is future-proof for higher speeds. Multimode is fine inside one building between the server room and IDF closets. Most Oxnard industrial jobs we quote end up single-mode because the runs are long and the price difference in cable is small. We will lay out both options after the free site survey.

When a run is longer than 100 meters, when it crosses between buildings or floors with separate electrical grounds, or when you need more than 10 Gbps. Camera systems on large lots and campuses usually need fiber to the far poles.

Yes. We locate the break with an OTDR, splice or re-terminate, and re-test. Most single breaks are fixed the same day once we are on site.

Every strand is tested with an optical power meter and, on longer runs, an OTDR. You get the loss report with the invoice.