New Construction Low Voltage Palmdale, CA | Rough-In, Cabling
Low voltage rough-in for Palmdale new construction
Palmdale is still building. New tilt-ups and industrial along Sierra Highway and east of the 14, housing in Anaverde and the west side, retail pads along Rancho Vista Blvd, medical office additions near Palmdale Regional Medical Center, school modernizations, and a steady stream of tenant improvements in existing centers.
Book a free Palmdale site survey Call (661) 246-3003 Text usWhat Palmdale construction & new builds need from a low voltage contractor
General contractors need a low-voltage sub who shows up at rough-in on the right day, coordinates with the electrician on conduit and boxes, and comes back for trim without being chased. Owners need the finished building to have cameras, access control, Wi-Fi and cabling that work on opening day.
ITECH2 does low-voltage rough-in and finish for Palmdale projects. Conduit, boxes and pull strings at framing. Cat6, Cat6A and fiber pulled and terminated. Camera and access control prewire so the finish is clean. Wi-Fi and network installed and tested before the certificate of occupancy. We also protect the site during construction with jobsite cameras and AI monitoring, from $1 per camera per day a month with the first month free, which matters in Palmdale where copper and tools walk off open sites. Free site survey or plan review to start.
We handle both sides of construction: monitored camera towers that stop theft during the build, and the low voltage rough-in and finish work that has to land at the right moment in the schedule. General contractors get one licensed sub for cabling, cameras, access and monitoring.
The problems we get called for
- Copper, tool and equipment theft from open sites
- Sites with no power or internet yet
- Cabling that has to go in before walls close
- Insurance and general-contractor security requirements
What we install
- Solar and battery-powered camera towers with cellular backhaul for open sites
- 24/7 AI monitoring with live voice-down from the first night
- Structured cabling, fiber and low voltage rough-in on the construction schedule
- Access control and cameras commissioned before turnover
- Temporary Wi-Fi for the site office and trailers
Construction & New Builds across Palmdale
New construction in Palmdale means working with the City of Palmdale Building & Safety Division on inspections, and with GCs who are often driving up from the Santa Clarita or San Fernando Valley side on the 14. Industrial sites along Sierra Highway and near Avenue M in 93550 need long conduit runs planned early. Residential and mixed-use in Anaverde and near Rancho Vista in 93551 have HOA and design guidelines for exterior devices. Open desert sites are easy targets for theft between shifts, so jobsite cameras and monitoring usually pay for themselves.
Cameras that stop theft, not just record it
AI Camera Monitoring watches your Palmdale property around the clock, warns intruders off with live audio the moment they step on site, and escalates real threats with video-verified dispatch. It works with cameras we install and, in most cases, with the cameras you already have.
$1 per camera per day on a schedule · $1.50 for 24/7 · first month free
Book your free assessment by September 30 and your first month of monitoring is free.
See how it works
Construction & New Builds in Palmdale — questions we get
When should a Palmdale general contractor bring in the low voltage sub?
Before framing is closed. We need to be on the plans for conduit, boxes and pathways so the electrician and framer leave room, and so the fire sprinkler and HVAC trades do not block the runs. On Palmdale tilt-ups that means coordinating during the panel and roof stage. Bring us in at bid or plan review and rough-in goes smoothly.
Can you protect a Palmdale construction site from theft between shifts?
Yes. We set up temporary cameras on poles or the structure, with a speaker, and connect them to AI camera monitoring so a live operator watches the site overnight and on weekends and talks to anyone who walks on. Copper, tools and appliances are the usual targets on open Palmdale sites. It starts at $1 per camera per day a month with the first month free.
Do you handle low voltage inspections with the City of Palmdale?
Yes. Where low-voltage work is part of the permitted scope, we coordinate the inspection with the City of Palmdale Building & Safety Division and are on site when the inspector comes. We keep the work to code, label and document everything, and provide as-builts at the end. Fire alarm and life safety work goes through the fire authority and we coordinate that too.
How do you secure a construction site with no power or internet?
With solar and battery-powered camera towers on cellular backhaul, monitored 24/7 by AI with live voice-down. They go up in an afternoon and move with the phases of the job.
When should low voltage rough-in happen on a new build?
Right after framing and electrical rough-in, before insulation and drywall. We coordinate with the GC schedule so pathways, boxes and cable are in place before walls close.
Can you monitor a jobsite for the length of the project?
Yes. Monitoring is month to month from $1 per camera per day, so it can run for the duration of the build and stop at turnover.
Services for Palmdale construction & new builds
Other industries we serve in Palmdale
Local guide: Security camera laws, permits and placement for Palmdale businesses (2026 guide)
Let's walk your Palmdale property — on us
Fill out the form and you will hear from us fast — usually the same day. Or skip the typing:
Call or text (661) 246-3003 — we answer.
Text us · Email tech@itech2.co
Have a question first? Read the FAQ or see who does the work.
Main office line: (866) 904-8787 · Licensed C-7 #1098090 · Since 2010