Network Cabling Los Angeles | Cat6 & Cat6A Installer
Network cabling in Los Angeles
Bad cabling in Los Angeles hides behind good-looking offices. We walk into suites in Century City and Downtown where the previous tenant left a bird's nest above the ceiling, drops with no labels, and a patch panel nobody trusts.
Book a free Los Angeles site survey Call (442) 222-2775 Text usNetwork Cabling done right for Los Angeles businesses
The symptoms are what you feel: a printer that disappears, a VoIP phone that crackles, a conference room where the video call drops right when the client joins. The fix is a clean Cat6 or Cat6A installation with a real patch panel, tested certification results, and labels on both ends.
We pull cable in every building type LA has. Plenum-rated runs through the return-air ceilings of Bunker Hill towers. Surface raceway in the brick lofts of the Arts District. Long horizontal runs across a Chatsworth tilt-up to reach the shipping office. Riser fiber and copper between floors of a Koreatown mid-rise. Whether you are moving into a suite on Wilshire or expanding a warehouse on San Fernando Road, we design the runs to fit the building instead of fighting it.
We terminate to TIA-568-B, keep bends and bundles within spec, and separate low voltage from power. Plenum cable goes above drop ceilings that carry return air, riser cable between floors. Every run is documented so the next tech — ours or yours — can find it in a minute.
What is included
- Cat6 and Cat6A structured cabling, plenum or riser rated to match your ceiling and code
- Patch panels, racks, cable management and a labeled, documented closet
- Certification testing on every drop with a printed test report
- Voice, data, PoE camera and access-point drops on the same run
- Conduit, J-hooks and pathways that pass inspection
- Moves, adds and changes after the install without a full re-pull
Free site survey in Los Angeles
We walk the property, count what you need and give you an itemized quote — free, no obligation.
Book itServing all of Los Angeles
ZIP codes 90012, 90013, 90014, 90015, 90017, 90021, 90071, 90028, 90038, 90024, 90025, 90064 and more. Nearby: Long Beach, Glendale, Pasadena, Santa Monica.
Network Cabling across Los Angeles
Downtown and Century City landlords typically require plenum-rated cable, firestopped sleeves, and after-hours work through the freight elevator. Older Fashion District and Boyle Heights buildings need coring and raceway because there is no ceiling to hide in. Valley industrial along Nordhoff, Roscoe and Plummer is mostly open-web tilt-up with J-hooks along the joists. Westside creative offices in Playa Vista and on Olympic Blvd want lots of drops per desk and a tidy rack. We have done all of it, and we plan around LADBS when a job crosses into permit territory.
Survey, install, document
Survey
We walk the space, count drops, trace pathways and check the closet, power and ceiling type. Free, and usually the same week.
Install
Cable is pulled in bundles, dressed, terminated to TIA-568 standards and labeled at both ends.
Certify
Every drop is tested with a certifier and you get the report, a drawing and photos of the closet.
Network Cabling in Los Angeles — questions we get
Should I run Cat6 or Cat6A in my Los Angeles office?
Cat6 is fine for most offices in Koreatown, Downtown or the Valley running gigabit today. Cat6A makes sense if you are wiring a new suite you will hold for years, need Wi-Fi 6E or 7 access points, or run a post-production or medical imaging workload on the Westside or in Hollywood. We price both after a free site survey so you can decide.
Can you cable a tenant improvement in a Downtown LA tower after hours?
Yes. Most Downtown and Century City buildings require noisy work, coring and freight elevator use after 6 p.m. or on weekends. We schedule with building engineering, carry the certificate of insurance they require, and use plenum-rated cable with proper firestopping at every rated penetration. Our crew is used to towers on Figueroa, Grand and Avenue of the Stars.
Do you certify and label network cabling in Los Angeles?
Every drop we install is tested with a certifier, labeled at the jack and the patch panel, and documented so your IT person or next contractor knows what goes where. That matters in LA buildings where tenants turn over often and nobody left drawings. Ask for a free site survey and we will show you what a clean closet looks like.
How long does a network cabling install take?
A typical office of 20 to 60 drops is one to three days. Larger buildouts are scheduled in phases so your team keeps working. After the free site survey you get a firm schedule with the itemized quote.
Cat6 or Cat6A — which should I choose?
Cat6 handles 1 Gbps at 100 meters and 10 Gbps at short runs, and is the right choice for most offices. Cat6A carries 10 Gbps the full distance and supports higher-power PoE, so we recommend it for new builds, Wi-Fi 6E/7 access points and anything you plan to keep for 15 years.
Do you label and test every cable?
Yes. Every drop is labeled at the jack and the patch panel, certified with a tester, and you receive the test report. Untested cabling is where intermittent network problems come from, so we do not skip it.
Other low voltage services in Los Angeles
Industries we serve in Los Angeles
Local guide: Security camera laws, permits and placement for Los Angeles businesses (2026 guide)
Let's walk your Los Angeles property — on us
Fill out the form and you will hear from us fast — usually the same day. Or skip the typing:
Call or text (442) 222-2775 — we answer.
Text us · Email tech@itech2.co
Have a question first? Read the FAQ or see who does the work.
Main office line: (866) 904-8787 · Licensed C-7 #1098090 · Since 2010